Norton Sandblasting Equipment- Vibratory Shaker

Vibratory Shakers

How Do They Work?

Once metal items to be cleaned are positioned inside the machine and the cycle timer is set, the shaft below the tub starts to rotate. The counterweight on the shaft works in unison with the super-duty springs holding the tub in place, to create a unidirectional high speed vibration.

Since the vibration in unidirectional, the aluminum or ceramic media vibrates rapidly while shifting in one direction. The unidirectional shifting of the media and the curved bottom of the tub causes the media to move on top from front to back, down the back wall, then up the front wall.

Through the continuous vibrating action of the media and shifting flow, parts are methodically stripped of scale, grease, grime, and oil. The longer the shaker runs, the smoother and shinier the parts become. Burrs disappear and sharp edges become blunt.

Aluminum media is specifically designed to cut through grease and grime fast. Multiple edges and points reach deep into those tough crevices, working in conjunction with the cleaning solution to penetrate tough, stubborn build-up.

Fast, Flexible, and Efficient

These mighty cleaning machines have long been a popular tool for both automotive and industrial cleaning applications.

  • alternator and starter housings
  • machined parts
  • CVs
  • water pump housings
  • connecting rods
  • valves

Just put your parts in and close the lid. Set the timer and find something else to do. That's it!
The vibratory action of the media works like little brushes, helping the cleaning solution scrub parts down to bare metal. Besides cleaning, they're also great for deburring, buffing, and polishing parts quickly, quietly and efficiently.


LS 7S Vibratory Shaker picture  

7S Vibratory Shaker

- Overall Dimension: length x width x height:
   71" x 36" x 52"
- Tub Capacity: length x width x height:
   47" x 18" x 16"
- Media Capacity
    475 lbs (aluminum)
    500 lbs (ceramic)
- Motor: 5 HP
- Counterbalance weight
- Superior bearing life
- All steel cabinet lined with sound reducing insulation
- Shock assist lid for easy operator opening / closings
- Solvent pump
- Built in solvent tray
- Attached wash/drain/dry station
- 1/2" urethane liner is 100% replaceable
- Hinged access door for operator maintenance

 
Counterbalance weight
Superior bearing life
Shock assist lid for easy operator opening / closings
Solvent pump
Built in solvent tray
Attached wash/drain/dry station
1/2" urethane liner is 100% replaceable
Hinged access door for operator maintenance

4S Vibratory Shaker

- Overall dimensions: length x width x height: 58" x33" x52"
- Tub Capacity: length x width x height: 30" x 18" x 16"
-- Parts Capacity: 150 pounds maximum
- Media Capacity
285 lbs (aluminum)
300 lbs (ceramic)
- Motor: 3 HP
- Voltage 220/3/60

- Counterbalance weight
- Superior bearing life
- All steel cabinet lined with sound reducing insulation
- Shock assist lid for easy operator opening / closings
- Solvent pump
- Built in solvent tray, (Drain Basin)
- Attached wash/drain/dry station
- 1/2" urethane liner is 100% replaceable
- Hinged access door for operator maintenance

Shipping Weight: 1080 lbs.



 

LS-72S Vibratory Shaker picture

72S Shaker

- Overall dimensions: length x width x height.. 144" x 73" x 6'8"
- Tub Capacity: length x width x height: 95" x 36" x 36"
- TEFC main drive motor: 15 HP, 220 / 440 volt
- Little Giant solvent pump: 110 volt
- Externally mounted solvent tank: 40 gallons
- Tub is canted for easy loading / unloading
- 4000# tumbling media capacity
- All steel cabinet lined with sound reducing insulation
- Pneumatically controlled lid for easy opening / closing
- Lid opens to allow loading from front or above
- Super heavy duty sealed shaft bearings with grease fittings
- Urethane liner is 100% replaceable
- Hinged access door for operator maintenance
- Solvent spray bar is equipped with steel spray nozzles
- Solvent valve allows manual adjustment of solvent
    flow during operation
- Hinged access doors on rear of machine for
    inspection and maintenance
- Sloped front for easy access to parts in such a large machine