Needle Scaler / Chisel- Norton Sandblasting Equipment

Needle Scaler / Chisel Tools and Accessories

Norton Sandblasting Equipment's pneumatic needle/chisel scalers are completely convertible to go from needle to chisel applications. Typical uses: de-rusting and cleaning of metals, peening of welded joints, cleaning castings, cleaning weld slag, removing barnacles, removing paint, rust, and dirt, chipping stone, concrete and brick.

Picture needle scaler
Click to view larger image

Needle Scaler, Pneumatic
Part # TPTX1B-LTNS

4600 BPM
Throttle Operated 12 CFM
Length: 17" with 5" Needles
(set of 5" needles included)
Convertible to chisel scaler

(chisels not included)
Bore: 1" Stroke: 1-1/8"
Inlet: 1/4" NPT
Minimum hose size: 3/8"
Weight: 7 lbs

Note: 7" needles are required for the optional Vacuum Attachment Kit (sold below). This scaler comes with 5" needles. 7" needles are sold below.


Vacuum attachment image
Click to view larger image

Vacuum Attachment Kit
for Needle Scaler
Part # TPTX1BLTNS-VT

Includes hose and clamps. Needle scaler and hose whip assembly not included.

This Vacuum Kit fits the Needle scaler,
TPTX1B-LTNS and the Needle/Chisel Millennium Kit, TPTX1BLTNS-MK


Note: 7" needles are required for the
Vacuum Attachment Kit

* Vac attachment will only work with Needle/Chisel Scaler Millennium Kit, Pneumatic TPTX1BLTNS-MK when unit is used as needle scaler.


Needle gun kit with case
Click to view larger image

Needle/Chisel Scaler
Millennium Kit, Pneumatic
Part# TPTX1BLTNS-MK

Each Kit Includes:
Chrome needle scaler
Set of 5" Needles
Set of 7" Needles
3/4" x 6.5" flat chisel
1-3/8" x 6.5" flat chisel
1-3/8" x 6.5" spoon chisel
Storage/carrying Case


Optional Vacuum Kit
TPTX1BLTNS-VT sold separately
* Vac attachment will only work when unit is used as needle scaler.

 



pic of chisel tip needles
Click to view larger image

Needles for Scaler
Part# TRE445. 3120

Chisel Tip Needles
3mm x 7"
Pack of 100
Note: 3mm = 0.118"

These needles fit the needle scaler TPTX1B-LTNS and the needle/chisel Kit, TPTX1BLTNS-MK


Note: 7" needles are required for the
Vacuum Attachment Kit


pic of chisel tip needles
Click to view larger image

Needles for Scaler
Part# TPTX-00058

Flat Tip Needles
3mm x 7"
Pack of 100
Note: 3mm = 0.118"

These needles fit the needle scaler TPTX1B-LTNS and the needle/chisel Kit, TPTX1BLTNS-MK


Note: 7" needles are required for the
Vacuum Attachment Kit


Needle gun image
Click to view larger image.

Needles for Scaler
Part# TPTX-00043

Flat Tip Needles
0. 125" x 5"
Pack of 100

These needles fit the needle scaler TPTX1B-LTNS and the needle/chisel Kit, TPTX1BLTNS-MK


Note: 7" needles are required for the
Vacuum Attachment Kit


picture Needle scaler with vacuum
* Note: 7" needles are required for the Vacuum Attachment Kit
* Vac attachment will only work with Needle/Chisel Scaler Millennium Kit, Pneumatic
TPTX1BLTNS-MK when unit is used as needle scaler.


 
diagram of needle scaler vac kit
* Note: 7" needles are required for the Vacuum Attachment Kit
* Vac attachment will only work with Needle/Chisel Scaler Millennium Kit, Pneumatic
TPTX1BLTNS-MK when unit is used as needle scaler.