Clemco Valves and Controls
FSV, AQV, and MQV Metering Valves For 3-cu ft and Larger Machines

AQV (Auto Quantum)
Part # CLE-24447 (1-1/4″)

The Auto Quantum Valve (AQV) is for pressure- hold remotes and pressure-release remotes equipped with an abrasive cutoff system. Abrasive cutoff permits shutting off abrasive to blow down surfaces with air. Available in pneumatic or electric.

Two Remote Control Options

  • Pressure release or pressure hold.
  • Each available with an abrasive cutoff system (ACS).

Use With:

  • All common abrasives—mineral, slag, or metallic.
  • Requires 80 psi to fully open plunger.

FSV: Flat Sand Valve
Industry-Setting Design
Part # CLE-02427 (1-1/4″)

The FSV, an original Clemco design, is the tried-and-true workhorse of the industry. It is among the most imitated Clemco components. It is  standard on machines with 3-cuft to 20-cuft pressure vessels.

  • Manual valve.
  • Pressure-release remote control.

Use With: 

  • Expendable mineral and slag abrassives.
  • Not suitable for metallic media.

MQV (Manual Quantum)
Part # CLE-22845

The Manual Quantum Valve (MQV) handles all types of media: mineral, slag, and metallic. Its design allows for precise metering and easy maintenance. It fits machines with 3-cu ft to 20-cu ft pressure vessels.

  • Manual valve.
  • Pressure-release remote control.

Use With:

  • All common abrasives—mineral, slag, or metallic.
Clemco Remote Controls

CLEMCO

RLX Pneumatic & Electric Remote Control Handles

Control handle for remote activation and deactivation of an abrasive blast machine. Fail-to-safe system stops blasting if operator drops or loses control of the handle.

TLR 300C Pressure-Release Pneumatic Systems feature an abrasive cutoff system (ACS), which enables operators to shut off the abrasive flow for clearing the blast hose and for blowing down surfaces after blasting. These remote control systems include inlet and outlet valves, an abrasive trap, and the air-operated normally closed Quantum Abrasive Metering Valve. Also available in electric models.

Quantum Pressure-Hold Pneumatic Remote Controls are designed for applications that require frequent starts and stops. Operators manually pressurize and depressurize machines equipped with these remote controls. Operators can then keep the machines pressurized regardless of  how often they start and stop blasting. The remote control handle can close the abrasive valve independently of the air valve so that only air exits the nozzle. This step permits clearing the blast hose and blowing down surfaces after blasting. Also available in electric models.